TECHNICAL DESIGN OF ELECTRIC BICYCLES AS OPERATIONAL AIDS IN THE AIRPORT FACILITY MAINTENANCE
DOI:
https://doi.org/10.52989/jaet.v5i2.207Kata Kunci:
Electric Bicycle, FEM, Airport Maintenance, Design, SustainabilityAbstrak
Airports, as the main gateway to air transportation in Indonesia, are increasingly expected to implement environmentally friendly practices, one of which includes the use of electric vehicles to support operational activities. This research aims to design the technical specifications of an electric bicycle as a tool for operational maintenance at airport facilities. The method employed is Research and Development (R&D) using the ADDIE model, supported by a literature review and simulation using SolidWorks 2021. The bicycle is designed with a simple, mild steel frame, a 350-watt BLDC motor, and a 48V 15Ah lithium-ion battery, with a payload capacity of up to 100 kg. Structural analysis using the Finite Element Method (FEM) shows that the design is structurally safe, with Von Mises stress and strain values remaining below the material's yield strength. The safety factor also indicates high structural reliability. The novelty of this study lies in the integration of FEM-based structural design with airport-specific operational requirements, thereby filling a gap in prior research that has primarily focused on general e-bike performance without consideration for the specific context of airport maintenance. With an estimated construction cost of IDR 8 million, the design presents a low-emission, cost-effective solution to support sustainable airport operations.
Unduhan
Referensi
Ainou, F. Z., Ali, M., & Sadiq, M. (2023). Green energy security assessment in Morocco: green finance as a step toward sustainable energy transition. Environmental Science and Pollution Research, 30(22). https://doi.org/10.1007/s11356-022-19153-7
Bagus Arya Dwipa, I. G. N., Abdullah, A., Martadinata, M. I., Komalasari, Y., & Amalia, D. (2024). Design of website-based Preventive Maintenance Checklist Smart System (PMCSS) to support the operation of ARFF vehicles at I Gusti Ngurah Rai Airport. Journal of Engineering and Applied Technology, 5(1), 11–23. https://doi.org/10.21831/jeatech.v5i1.67708
Das, S., Roy, D., & Sengupta, M. (2022). Detailed FEM-based Analysis of Vibration in a 3-phase Switched Reluctance Motor and its Experimental Validation. SPICES 2022 - IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems. https://doi.org/10.1109/SPICES52834.2022.9774166
Elliot, T., McLaren, S. J., & Sims, R. (2018). Potential environmental impacts of electric bicycles replacing other transport modes in Wellington, New Zealand. Sustainable Production and Consumption, 16. https://doi.org/10.1016/j.spc.2018.08.007
Gilbert, E., Prima, F., & Taufiqurrahman, M. (2023). Pengembangan Desain Sepeda Listrik Menggunakan Metode Kansei Engineering. Jurnal Teknologi Rekayasa Teknik Mesin (JTRAIN), 4.
Gupta, A., Chitgopekar, S., Kim, A., Jiang, J., Wang, M., & Grattoni, C. (2023). The Growth of E-Bike Use: A Machine Learning Approach. 2023, 1–25.
Hafeez, M. B., & Krawczuk, M. (2024). Fractional Spectral and Fractional Finite Element Methods: A Comprehensive Review and Future Prospects. In Archives of Computational Methods in Engineering (Vol. 31, Issue 6). https://doi.org/10.1007/s11831-024-10083-w
Hastuti, S., Ramadhani, W., & Mulyaningsih, N. (2022). Analisis Kekuatan Pada Rangka Sepeda Motor Listrik. Politeknik Manufaktur Ceper, 5(2), 1–11.
Hosseini, K., Pramod Choudhari, T., Stefaniec, A., O’Mahony, M., & Caulfield, B. (2024). E-bike to the future: Scalability, emission-saving, and eco-efficiency assessment of shared electric mobility hubs. Transportation Research Part D: Transport and Environment, 133(March), 104275. https://doi.org/10.1016/j.trd.2024.104275
Hotma, L., Purnama, H., Purnomo, E. D., Arifin, Nasril, Azka, M., Sulistiyo, W., Perkasa, M., Marpaung, F., & Nugroho, E. A. (2024). Materials Selection for Low-Cost Manufacturing of Electric Motorcycle Platform by Using Finite Element Method (FEM) Evaluation and Digital Logic Method (DLM). AIP Conference Proceedings, 3069(1), 20030.
Li, M., Sun, C., Yuan, X., Li, Y., Yuan, Y., Jin, H., Lu, J., & Zhao, Y. (2024). A Configuration Entropy Enabled High-Performance Polyanionic Cathode for Sodium-Ion Batteries. Advanced Functional Materials, 34(21). https://doi.org/10.1002/adfm.202314019
Martadinata, M. I., Febiyanti, H., Suryan, V., Pratama, R. A., & Nabilah, H. A. (2021). Implementasi Safety Management System Di Bandar Udara Internasional Radin Inten II Pada Masa Pandemi Covid -19. Journal of Airport Engineering Technology (JAET), 2(01). https://doi.org/10.52989/jaet.v2i01.44
Morozov, S. Y., & Fedotova, D. S. (2020). Agreement-Based Regulation of Joint Activities in Energy and Transport Industries. Journal of Environmental Treatment Techniques, 8(1), 291–298.
Pareza, S., Purwantono, P., Lapisa, R., & Primawati, P. (2020). Build Design Of Electric Bike As Energy Efficient Transportation. MOTIVECTION: Journal of Mechanical, Electrical and Industrial Engineering, 2(2), 65–72. https://doi.org/10.46574/motivection.v2i2.59
Puspitasari, N. A., & Nugraha, P. (2021). Simulasi Stress Analysis Pembebanan Statis Dengan Bantuan Software Solidworks Pada Hasil Perancangan Ladder Frame Chassis Mobil Listrik Menggunakan Material AISI 4340. Seminar Nasional – XX Rekayasa Dan Aplikasi Teknik Mesin Di Industri, November, 25–33.
Setiadanu, G. T., Gunawan, Y., Titanandana, G., Pratama, A., Qolbi, N., Ketenagalistrikan, P., Baru, E., Lama, K., Selatan, J., Mesin, D. T., Indonesia, U., & Barat, J. (2021). the Modelling Three Wheel Wagon E-Bike Frame. 19(1), 41–50.
Setyoadi, Y., & Annanto, G. P. (2018). Optimasi Desain Rangka Sepeda Gunung Menggunakan Metode Elemen Hingga. Rotasi, 20(3), 172. https://doi.org/10.14710/rotasi.20.3.172-177
Sheikholeslami, A., Hossein, A., Langeroodi, T., & Khorshidi, O. (2023). AirPort Classification. November.
Sudirman Hi Umar, Muhammad Taufiq Y.S, & Nurmaiyasa Marsaoly. (2023). Analysis of New Loleo Airport Facilities in Tidore City Islands. Technium: Romanian Journal of Applied Sciences and Technology, 17. https://doi.org/10.47577/technium.v17i.10080
Suryan, V., Amalia, D., Indra Martadinata, M., Septiani, V., Nurfitri, M. A., Silitonga, E., Ardia, W., Politeknik, C., & Palembang, P. (2024). Eco Airport Design: Rancangan Gedung Terminal Ramah Lingkungan pada Bandar Udara. Jurnal Talenta Sipil, 7(2), 759–773. https://doi.org/10.33087/talentasipil.v7i2.583
Taylor, M., Saldanli, A., & Park, A. (2020). Analysis of Alternate Vertiport Designs. Proceedings IEEE ICNS Conference.
Yasa Pastika, I. K., & Ery Suardana, P. (2021). Penerapan Eco Airport Pada Bandar Udara Internasional I Gusti Ngurah Rai. Jurnal Anala, 9(2). https://doi.org/10.46650/anala.9.2.1156.29-36
Zdraveski, F., Bogatinoski, Z., & Trajanoska, B. (2016). Modeling of single-fillet lap joint in Solidworks Simulation. Journal of Applied Engineering Science, 14(1). https://doi.org/10.5937/jaes14-8900
##submission.downloads##
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2025 M Indra Martadinata, Asep M Soleh, Hana Fatiha, Romi Ario , Fadhilla Nina Riskiyanti
Artikel ini berlisensi Creative Commons Attribution-NonCommercial 4.0 International License.
_1.png)
